Find all the information to install and program your NATIV towel dryer.
Place the thermostat:
IMPORTANT: Do not install the thermostat on a wall in contact with the outside or with an unheated room (e.g. garage, etc.).
❶ Put the receiver(s) in association mode (see receiver instructions).
❷ The thermostat must be in Off mode. Press the 2nd button from the left for 5 seconds. The screen displays the thermostat version.
❸ Press the 2nd button from the left again for 5 seconds. The screen displays the rF01 menu.
❹ Press OK. The thermostat searches for the receivers to associate. The number of receivers found and associated is displayed in the center of the screen.
